Network Training - Course Details

ICND2-ICND2 ICND2 - Interconnecting Cisco Network Devices 2

Network Training Course Description:
Building on the skills provided by ICND1 (Interconnecting Cisco NetworkDevices 1), ICND2 not only delivers essential information needed to pass theCCNA certification exams, it also gives you a solid technical foundation toensure that you can succeed on the job. We've added our own real-world, hands-on labs designed by expert instructorsto give you experience with practical scenarios, including issues involved whenyou expand the switched network from a small to medium network environment.
Network Training Course Duration:
5 DAYS
Network Training Course Target Audience:
Network technicians and specialists looking to increase their knowledge of medium-sized switched and routed networks,Anyone looking to achieve CCNA certification
Network Training Course Prerequisite:
Firm background in data networking,Some hands-on experience with Cisco routers and switches,Basic working knowledge of switches and routers,Complete understanding of the OSI model, IP addressing, and IP subnetting
Course Content:

    • 1. Small Network Implementation

    • 2. Medium-Sized Switched Network Construction

      • VLANs and Trunks
      • Spanning Tree Performance Optimization
      • Routing Between VLANs
      • Securing the Expanded Network
      • Troubleshooting Switched Networks

    • 3. Medium-Sized Routed Network Construction

      • Routing Operations
      • Implementing VLSM

    • 4. Single-Area Open Shortest Path First (OSPF)

      • Implementing OSPF
      • Troubleshooting OSPF

    • 5. Enhanced Interior Gateway Routing Protocol (EIGRP)

      • Implementing EIGRP
      • Troubleshooting EIGRP

    • 6. Access Control Lists (ACLs)

      • ACL Operation
      • Configuring and Troubleshooting ACLs

    • 7. Address Space Management

      • Scaling the Network with NAT and PAT
      • Transitioning to IPv6

    • 8. LAN Extension into a WAN

      • VPN Solutions
      • Establishing a Point-to-Point WAN Connection with PPP
      • Establishing a WAN Connection with Frame Relay
      • Troubleshooting Frame Relay WANs

    • Lab 1: Implementing a Small Network (Review Lab)

      Configure your workgroup switch and router with a basic configuration based onthe network information provided.

    • Lab 2: Enhanced - Configuring Expanded Switch Networks

      Expand the switch configuration to meet specific VLAN and network requirements.

    • Lab 3: Enhanced - Troubleshooting Switched Networks

      Use troubleshooting methods discussed to diagnose, isolate, and correct problemscommonly found in a switched network.

    • Lab 4: Enhanced - Implementing OSPF

      Configure your workgroup routers to use the dynamic routing protocol OSPF.

    • Lab 5: Enhanced - Troubleshooting OSPF

      Use troubleshooting methods discussed to diagnose, isolate, and correct problemscommonly found when running the OSPF routing protocol.

    • Lab 6: Enhanced - Implementing EIGRP

      Configure your workgroup routers to migrate from OSPF to EIGRP.

    • Lab 7: Enhanced - Troubleshooting EIGRP

      Use troubleshooting methods discussed to diagnose, isolate, and correct problemscommonly found when running the EIGRP routing protocol.

    • Lab 8: Enhanced - Implementing ACLs

      Create IP standard, extended, and named ACLs and verify that they are working

    • Lab 9: Exclusive - Troubleshooting ACLs

      Troubleshoot common IP ACL issues.

    • Lab 10: Enhanced - Configuring Network Address Translation (NAT) and Port AddressTranslation (PAT)

      Configure your workgroup routers to use static and dynamic NAT and PAT.

    • Lab 11: Enhanced - Implementing IPv6

      Configure IPv6 addresses on your workgroup routers and deploy RIPng betweenthem.

    • Lab 12: Enhanced - Establishing a Frame Relay WAN

      Create a Frame Relay connection to the other pod router and to the corerouter using a serial interface on each pod router.

    • Lab 13: Enhanced - Troubleshooting Frame Relay WANs

      Use troubleshooting methods discussed to diagnose, isolate, and correctproblems commonly found in a Frame Relay network.

    • Lab 14: Exclusive - The Super Lab

      Rebuild the configuration on the pod devices from scratch, includingsecurity, IP addressing, interface encapsulations, and routing protocol.



    • 1. Small Network Implementation

    • 2. Medium-Sized Switched Network Construction

      • VLANs and Trunks
      • Spanning Tree Performance Optimization
      • Routing Between VLANs
      • Securing the Expanded Network
      • Troubleshooting Switched Networks

    • 3. Medium-Sized Routed Network Construction

      • Routing Operations
      • Implementing VLSM

    • 4. Single-Area Open Shortest Path First (OSPF)

      • Implementing OSPF
      • Troubleshooting OSPF

    • 5. Enhanced Interior Gateway Routing Protocol (EIGRP)

      • Implementing EIGRP
      • Troubleshooting EIGRP

    • 6. Access Control Lists (ACLs)

      • ACL Operation
      • Configuring and Troubleshooting ACLs

    • 7. Address Space Management

      • Scaling the Network with NAT and PAT
      • Transitioning to IPv6

    • 8. LAN Extension into a WAN

      • VPN Solutions
      • Establishing a Point-to-Point WAN Connection with PPP
      • Establishing a WAN Connection with Frame Relay
      • Troubleshooting Frame Relay WANs

    • Lab 1: Implementing a Small Network (Review Lab)

      Configure your workgroup switch and router with a basic configuration based onthe network information provided.

    • Lab 2: Enhanced - Configuring Expanded Switch Networks

      Expand the switch configuration to meet specific VLAN and network requirements.

    • Lab 3: Enhanced - Troubleshooting Switched Networks

      Use troubleshooting methods discussed to diagnose, isolate, and correct problemscommonly found in a switched network.

    • Lab 4: Enhanced - Implementing OSPF

      Configure your workgroup routers to use the dynamic routing protocol OSPF.

    • Lab 5: Enhanced - Troubleshooting OSPF

      Use troubleshooting methods discussed to diagnose, isolate, and correct problemscommonly found when running the OSPF routing protocol.

    • Lab 6: Enhanced - Implementing EIGRP

      Configure your workgroup routers to migrate from OSPF to EIGRP.

    • Lab 7: Enhanced - Troubleshooting EIGRP

      Use troubleshooting methods discussed to diagnose, isolate, and correct problemscommonly found when running the EIGRP routing protocol.

    • Lab 8: Enhanced - Implementing ACLs

      Create IP standard, extended, and named ACLs and verify that they are working

    • Lab 9: Exclusive - Troubleshooting ACLs

      Troubleshoot common IP ACL issues.

    • Lab 10: Enhanced - Configuring Network Address Translation (NAT) and Port AddressTranslation (PAT)

      Configure your workgroup routers to use static and dynamic NAT and PAT.

    • Lab 11: Enhanced - Implementing IPv6

      Configure IPv6 addresses on your workgroup routers and deploy RIPng betweenthem.

    • Lab 12: Enhanced - Establishing a Frame Relay WAN

      Create a Frame Relay connection to the other pod router and to the corerouter using a serial interface on each pod router.

    • Lab 13: Enhanced - Troubleshooting Frame Relay WANs

      Use troubleshooting methods discussed to diagnose, isolate, and correctproblems commonly found in a Frame Relay network.

    • Lab 14: Exclusive - The Super Lab

      Rebuild the configuration on the pod devices from scratch, includingsecurity, IP addressing, interface encapsulations, and routing protocol.